| Industrial
Process Controllers & Monitors
alpha-CON
2000 Wall/ Panel Mount Conductivity Analyzer
-
Seven ranges in a single
controller allows the controller
to be used in a wide variety of applications with the maximum range
at 1000 mS/cm
-
User-Customization
through Advanced Setup Menu
offers flexibility in matching the controller's functions to suit
individual's specific requirement
-
Choice of 4-cell or 2-cell
electrode system
-
Programmable for On/Off,
Proportional, or PI (Proportional Integral Control)
- ideal for most demanding precision process control applications
-
Backlit Display
offers reading in low-light
conditions
-
Universal Power
Supply Input from 85 to 250 VAC/DC allows
use at multiple sites and withstands voltage fluctuations
-
Two
Galvanically Isolated Scaleable 0-20/4-20
mA Outputs
for Conductivity and temperature
-
Wash Contact Relay controls
electrodes cleaning systems at desired duration and frequency
-
Adjustable Hysteresis
(Dead Band) prevents rapid contact switching near set point
-
Non-Volatile Memory
retains all stored parameters
and calibration data even if power fails
- Large Dual Display shows measurement
with temperature simultaneously - features clear multiple icons, set
points, and status messages
- Choice of Temperature Sensor
Pt100/Pt1000 with 2-wire or 3-wire temperature input selection
- Rugged NEMA 4X housing simplifies
installation outdoors and indoors. Pipe, Wall or Panel mount
- Easy Installation and Wiring with
detachable plug-in connectors
- Panel-mounted version is also available
Applications
General: Use for virtually any batch
or online applications where rapid, accurate control. Great for OEM/system
integrator.
Industrial:
Use in applications involving agriculture, chemical processing,
boiler and water heaters, wafer-fab, microprocessor manufacturing,
pharmaceuticals, pulp and paper industries, and bleach manufacturing.
Water Purification/Treatment: Use to treat batches of incoming
process water, ultrapure water, boiler and feed water control.
Regulatory: Hook to recorder to document
data for regulatory compliance.
| Product
Code |
EC-CONCTP2000W
/ EC-C0NCTP2000P |
| Conductivity
Range |
0.000
- 2.000, 20.00, 200.0, 2000 µS/cm;
20.00, 200.0, 1000 mS/cm |
| Resolution
& Accuracy |
0.001,
0.01, 0.1, 1 µS/cm; 0.01, 0.1, 1 mS/cm
& ± 1% Full Scale (± 2% Full Scale > 500 mS/cm) |
| Relative Accuracy |
±1%
of full scale reading (±2% > 500 mS/cm) |
| Temperature
Range |
-10.0
to +125.0°C (14.0 to 257.0°F) |
| Resolution |
0.1°C/°F |
| Relative Accuracy |
±0.5°C
(±0.9°F) |
| Sensor |
Pt100/
Pt1000 (jumper selectable); 2 or 3 wire |
| Cell Constants |
0.01,
0.1, 1.0, 10.0 |
| Temperature
Compensation |
Auto/
manual (normalised at 25°C) |
| Type of Controller
Setting |
P/PI,
Limit, Off (Monitoring);
Proportional (Pulse Length or Pulse Frequency) |
No. of Relays
Maximum Voltage
Maximum Current
High/Low Hysteresis Band |
1
SPDT, 3 SPST relays; 1 Alarm
250 VAC
3A;
0 to 10% Full Scale |
| Pickup/ Dropout
Delay |
0
to 2000 seconds |
| Wash Cycle/Duration |
0.1
to 199.9 hrs & 1 to 1999 sec |
| Power |
80
to 250 VAC/DC 50/60 Hz Approx. 10VA |
| Dimensions
/ Weight |
Wall
Mount |
144
x 144 x 110 mm |
| Panel
Mount |
96
x 96 x 175 mm |
| Wall
Mount |
745g
(unit) / 1100g (packed) |
| Panel
Mount |
550g
(unit) / 950g (packed) |
| Wall
Mount |
IP
65 (NEMA 4X) |
| Panel
Mount |
IP
54 (front panel) |
Thermo
Fisher Scientific Inc.
 
Copyright © 2003 Eutech Instruments
Pte Ltd. 4info@eutechinstamerica.com
|
